Home Insulation Services Photo Album: Attic Insulation in Chestertown, MD

Homeowners in Chestertown, MD were struggling with their vented attic. This homeowner's attic was not properly air sealed or insulated which allows the attic to reach extreme temperatures in the winter and summer. Vented attics can reach as low as -30 degrees Fahrenheit and as high as 130 degrees Fahrenheit. Due to the attic not being properly air sealed, air from the within the home leaks up through the attic floor and into the attic. Once the air reaches the attic it is lost. This causes drafts within the home and high utility costs. Dr. Energy Saver helps solve this problem by properly air sealing and insulating this homeowner's attic. Dr. Energy Saver carefully air seals any gaps in the attic that causes air to flow in or out. Next, Dr. Energy Saver will properly insulate the home with TruSoft Blown-in Cellulose Insulation. The results are less drafty, more comfortable home while also lowering utility costs. Now the homeowner can live comfortably and energy efficiently in their own home!

Old Attic Insulation

This photo captures the old attic insulation before Dr. Energy Saver Delmarva removed it and replaced it with TruSoft Cellulose Insulation.

Measuring Insulation

Depending on where a homeowner lives, depends on how much insulation they need in their attic. Dr. Energy Saver will measure the insulation in the attic and see if their is an adequate amount.

Removing Old Attic Insulation

Dr. Energy Saver Delmarva has removed the old attic insulation to prepare for the installation of the TruSoft Cellulose insulation.

Installing TruSoft Cellulose Insulation

Dr. Energy Saver has installed the TruSoft Cellulose Insulation into the attic while also creating an insulation dam to hold it all in place.

Measuring Cellulose Insulation

After Dr. Energy Saver Delmarva installed the TruSoft Cellulose Insulation, they measured the insulation to make sure the proper amount was installed.