Home Insulation Services Photo Album: Debris Removal in Crawl Space in Worton, MD
Homeowner's in Worton, MD needed their crawl space to be completely cleaned out and updated.
These homeowner's crawl space was vented with a dirt floor which was causing many problems within the home. Cool and warm air pass through the vents in the crawl space which causes condensation and humidity. This allows the fiberglass insulation to sag away from the subfloor making it useless. So much of the fiberglass had fallen from the subfloor that it was impossible to get into the crawl space.
Dr. Energy Saver Delmarva will remove all the debris in the crawl space and insulate it.
The process is called the CleanSpace Encapsulation System. First, the vents are sealed and the walls are spray with spray foam to create a thermal barrier. Next, the drainage matting is installed along the dirt floor. The drainage matting is dimpled to create air space for water to flow. Finally, the CleanSpace liner is applied on top of the drainage matting.
The results are lower humidity, less drafts and lower utility costs.
A Dirty Crawl Space
Cool and warm air pass through the vents in the crawl space causing high condensation and humidity levels. This allows the insulation to sag away from the sub floor, causing it to be useless.
A Dirty Crawl Space
This photo captures another angle of the crawl space and the continuous insulation that has fallen from the sub floor.
Debris Removed from the Crawl Space
This photo captures the debris and old insulation that had fallen in the crawl space. Dr. Energy Saver Delmarva removed all of the debris to prepare for CleanSpace Encapsulation System.
Spray Foam and CleanSpace Installation
Dr. Energy Saver Delmarva has applied Spray Foam to the walls of the crawl space as a thermal barrier and applied CleanSpace Liner to the dirt floor.