Sagging Insulation
The constant flow of warm and cool air through the vents causes high humidity levels in the crawl space. This allows the insulation to sag away from the sub floor.
A Moldy Crawl Space
This photo captures the dirty crawl space before renovations by Dr. Energy Saver Delmarva.
A Leaky Crawl Space Access Door & Well
Leaky wells and crawl space access doors fill up with water, leaves, dirt and bugs causing a mess for homeowners.
Removing Existing Insulation
The old, dirty and sagging insulation is removed from the crawl space.
Installation of Drainage Matting
After the existing insulation is removed, drainage matting is installed along the dirt floor. The drainage matting is dimpled to create air space for water to flow.
CleanSpace Encapsulation System
After the drainage matting is installed, the SilverGlo is applied along the walls and the CleanSpace liner installed over top of the drainage matting.
CleanSpace Encapsulation System
Another angle of the crawl space while the CleanSpace liner is being installed.
Preparing for The Turtl
The Dr. Energy Saver Delmarva Team has beginning prepping for the installation of The Turtl.
Preparing for The Turtl
Another photo captured of the Dr. Energy Saver Delmarva team prepping for The Turtl.
The Turtl
Finally, the Turtl is installed! The Turtl is airtight and watertight to prevent water leakage, air leakage and dirt from getting into the crawl space.
The Turtl Open
Another photo of The Turtl with the lid open for access to the crawl space.